TECHNICA ZSM 1000

•  
  Referans numarası 1049-433419

  Üretim Yılı 1975

  Çalışma Saati Uygulanabilir değil

• Satıcı

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Ana Kategori

  Metal working machines

• Kategori

  Drilling machines

• Makine tipi

  Centre drilling machines

• İmalatçı

  TECHNICA

• Teknik veriler

  workpiece diameter

  8-125 mm

  grinding depth

  130 mm

  clamping length

  50-1100 mm

  max. workpiece diameter

  0 mm

  min. workpiece diameter

  0 mm

  workpiece length

  mm

  total power requirement

  1 kW

  weight of the machine ca.

  500 kg

  dimensions of the machine ca.

  m

• Tanım

  T E C H N I C A (Switzerland)
  Centre Hole Grinding Machine Model ZSM 1000
  Year approx. 1975 Serial No. J 1400
  _______________________________________________________
  Distance between centres 50 – 1,100 mm
  Height of centres 145 mm
  Workpiece Ø 8 – 125 mm
  
  Max. centre hole taper Ø 2 – 50 mm
  Max. centre hole taper angle 60 °
  
  Clamping range of vice 4 – 150 mm
  
  Stroke of grinding head 130 mm
  Stroke of grinding tool on workpiece 0.75 – 5 mm
  
  Grinding tool Ø 15 – 60 mm
  Grinding spindle speeds 13,000 – 45,000 rpm
  Workpiece drive 0 rpm
  
  Total electrical load, approx. 0.5 kW - 380 V - 50 Hz
  Weight, approx. 500 kg
  
  Accessories / Special Features:
  
  * A cone shaped grinding wheel is employed, but it is only in line
  contact with the centrehole surface, in addition it is reciprocating
  simultaneously along this line.
  * The workpiece remains stationary, enabling the procuction of perfect
  centre holes.
  * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck
  which gives three point contact and always coincides with the center of
  the grinding spindle.
  * Height-adjustable workpiece centering tool with carbide inserts.
  Manual adjustment of appropriate workpiece diameter with a rachet
  coupling.
  * Manual dressing device, mounted on the side of the grinding spindle,
  stroke approx. 40 mm, for producing a geometrically exact conical form.
  * Pre-centering device for Workpiece only partially available.
  * Height-adjustable tailstock and bore in machine base allow longer
  workpieces.
  
  Condition : average to good/should be reconditioned.
  Machine can be inspected under power.
  Delivery : Ex stock, as inspected
  Payment : Net, after conclusion of contract
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Eyalet

  Kullanılmış