HSC 75 linear (Reference-Nr. 055088)

•  
  Reference number 055088

  Manufacture Year 2023

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  High Speed Machining Centers (HSC)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  Tool changer
  Application	Vertical
  Type of gripper	Pick up
  Type of magazine	Wheel
  Number of tools	30
  General
  HSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI
  Technical Data
  Spindle taper	HSK-A 63
  Feed rate longitudinal/transverse/vertical	1-90000/1-90000/1-90000 mm/min
  Rapid traverse longitudinal/transverse/vertical	90/90/90 m/min
  Working area 1
  Longitudinal	750 mm
  Cross	600 mm
  Vertical	560 mm
  Floor space/Weight
  Dimensions (L x W x H)	6,65 x 7,6 x 3,18 m
  Weight approx.	12000 Kg

• Specification

  
  

  Splash guard equipment/cabin	Splash guard equipment/cabin with illumination and sliding doors on operators side and front side
  Motor spindle with HSK-A 63	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Speed range - 18.000 rpm
  	Spindle taper HSK-A 63
  HSC75 linear 5-Axis Specification	HSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilting range B-axis +10/-110°; C-axis 360° Table load max. 800kg / 1763 lbs Absolute Measuring systems incl. permanent cooling of B- and C-axis motor
  Production package for high swarf volume with ICS	Production package for high swarf volume ICS with paper type filter 40 bar / 23 l/min / 980-l tank / 580 psi/ 6 gallon/min / 258.9 gallon incl. swarf conveyor, scraper type with wedge wire screen extended swarf flushing, rotating clear view window coolan
  Monitoring lamp, 4 colours	Monitoring lamp, four colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Application Tuning Cycle ATC-Software	Application Tuning Cycle ATC-Software Selection of the optimal milling mode for the next machining-step

• State

  Used