SCHROEDER MAKV 200020

•  
  Reference number 1073-76566

  Manufacture Year 2009

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Hydraulic Folding machines

• Manufacturer

  SCHROEDER

• Control

  CFB 120

• Technical data

  sheet width

  2020 mm

  plate thickness

  2,00 mm ST

  thickness at "Niro-steel"

  1.25 mm

  bending angle max.

  135 °

  stroke of upper beam

  120 mm

  adjustment

  UW 25.0 mm

  Control

  CFB 120

  voltage

  400 V

  total power requirement

  2.0 kW

  weight of the machine ca.

  1410 kg.

  dimensions of the machine ca.

  2930 x 2200 x 1175 mm

• Description

  ** new condition (!!)
  ** New price at the time including accessories was approx. 35.000 euros
  ** Special price on request
  
  SCHRÖDER bending beam drive enables high forces and moments
  Efficiency. This means significantly reduced drive power
  lower energy consumption, but with increasing speed and
  Running - dynamics. The upper beam drive designed in the middle enables
  balanced torque distribution across the entire drive unit. The
  completely closed drive and guide units
  almost maintenance and wear-free operation. The regulation of the individual
  Drive axles are basically with a high quality parameter
  switchable frequency converter implemented. The CNC graphics control
  is combined with servo drives, which are optimized by the
  Power utilization results in a significant increase in speed and power.
  
  Furnishing:
  - SCHRÖDER CNC control CFP 120
  * Simple and clear program creation
  * Enter data via 12" LCD touch screen (swivelable)
  * Program set consisting of:
  Sheet thickness in mm or inches
  Opening width of the upper beam in mm or inches
  Bend angle
  Bend angle correction
  Dimension of the back gauge
  * Tool library
  * PLC control program
  * Tool position memory for each program
  * max. 99 cycles per bending set
  * Information aids such as actual value display / error display etc.
  * EMERGENCY stop button at the front
  - very high travel speeds of all controlled axes
  - CNC electro-motorized back gauge, with sheet metal support surface
  * Sheet metal support surface made of stainless steel (special accessory)
  - manual bending beam adjustment.. max. 25.0 mm
  - SCHRÖDER bending tool set
  - 1x freely movable double foot switch
  - Connection cable including power plug
  - Control cabinet installed on the side
  - 2x transport hooks for hanging the machine
  - original instruction manual
  
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used