Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
DMU 50 (Reference-Nr. 011146)
Request about this Machine
Asking price
- Reference number 011146Manufacture Year 2022Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Machining centresType of Machine
Machining centres (Universal)Manufacturer
DMG MORIControl
HeidenhainDescription
Working area 1 Longitudinal 650 mm Cross 520 mm Vertical 475 mm Technical Data Type of main drive AC Drive power (100% DC) 30 kW Drive power (40% DC) 46 kW Speed range 20 - 15000 rpm Spindle taper HSK-A 63 Clamping System HSK-A 63 Feed rate longitudinal/transverse/vertical -42000/-42000/-42000 mm/min Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min General Universal Milling Machine; Control: CELOS with Heidenhain TNC 640 Floor space/Weight Dimensions (L x W x H) 2,85 x 2,35 x 2,75 m Weight approx. 7500 Kg Specification
Spindle speed 15,000 rpm, 200Nm Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) NC swivel rotary table Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Tool magazine 60 pockets Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading Swarf conveyor, with cleaned slot screen Swarf conveyor, scraper type with cleaned slot screen Internal coolant supply 40bar/600l Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard) Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate Chip flushing for working area Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS) State
Used